Series Q Pushbutton switches are designed for snap-in panel mounting.
Approvals
UL & CSA approved; VDE approvals pending. Load rating: 10A
125/250 VAC, 1/4 HP, 125 VAC; 10A 14VDC. Contacts: fine
silver, double break. Circuits: single-pole and double-pole.
Dielectric strength: 2000 VAC RMS. Life: 25,000 operations
at maximum rating.
Low Level Control
For low level/dry circuit applications (<100 ma) contact factory for technical assistance.
Terminals
3/16" quick-connect brass with fine silver contacts (gold plating available).
Mechanical Features
Positive mechanical indication of switch contact position. 100,000 mechanical operations.
Lamps
Integral with switch; internally connected per diagram.
Incandescent Lamps — 6, 12 and 28 volt for use with any color
lens window.
Neon Lamps — 125 and 250 volt standard orange for use with red, clear or amber caps. 125 and 250 volt special green for use with
green or clear lens window.
LED's — 6 or 12 volt available in red or green color option: Red
LED with red, clear or amber lens window; Green LED with clear
or green lens window.
Note — LED polarity must be observed. (The positive terminal is
the longer of the two leads, #3).
Markings
Letters, numbers and symbols can be laser etched or pad printed
on the button.
APPLICATIONS · PRODUCTS · WHAT'S NEW · ABOUT OSLO